Kit includes: 

•  220 grit sandpaper
•  Part B Syringe w/tip
•  Part A container
•  Stir Stick
•  Part X container
•  Small 1 inch nap roller
•  Large 2 inch nap roller
•  Scotch brite pad       

Not included: 

•  Clean cloth
•  Painters tape
•  Rubber gloves
•  1 and 2 inch paint roller handles 
•  Acetone

Instructions:

-lightly sand slab surface in circular motions using 220 grit sandpaper

-Use clean cloth to wipe dust from slab surface

- apply painters tape to any walls/faucets/under mount sinks to protect from sealer while rolling

-Open a window and/or turn on exhaust fan for ventilation

-with rubber gloves apply acetone to a clean cloth and thoroughly wipe down surface to remove any wax/dust residue from surface

-once slab is completely dry, remove tape from part B syringe. Be careful not to remove the tip on the syringe.

-add all of part B to part A in the part A container and mix for 5 straight minutes with stir stick

-let sealer rest for 10 minutes - after l0-minute induction period, pour part x into sealer container mix for l minute with stir stick. Pour out enough sealer to cover the damaged area

-use smaller roller nap to roll out the sealer evenly in damaged area

-let the sealer sit for 3 minutes until slightly tacky

-use large roller nap and roll quickly with tight pressure to even out and blend sealer

-let sealer dry undisturbed for 24 hours. Once dry use Scotch Brite pad on an orbital sander to buff out any roller marks